Booth construction materials explained

　　First, the ground commonly used structures are: wooden floor, luminous floor, ground carpet, ground floor, luminous glass floor, simulation turf carpet, ground floor tile paving, wooden floor on the carpet.
　　1. Wooden flooring basically has a 1m╳2.2m╳10cm flooring frame underneath, then 12cm boards on top, and finally carpets or flooring etc.
　　2, light-emitting floor is generally the first iron frame to do the framework, the lower side of the installation of fluorescent tubes laying opal film, according to the requirements can be mounted on the translucent airbrush, the top layer of glass, thickness of 12 centimeters -15 centimeters, according to the size of the surface of the force, the internal playing lights must be uniform and strong translucency.
　　3, the carpet is required to be flat, spliced with glue, no cracking, no bulging.
　　4, the floor requires that the splices strive to minimize, do not plane sliding.
　　5, glass floor splices compact, no sliding, in addition to clean to be clean.
　　Second, the panel wall structure modeling: single wall (also known as single package wall), double-sided wall (double package wall), the surface modification commonly used: paint, fire prevention board, stickers.
　　Process Requirements:
　　1. A single-sided wall is a wall with one side painted or fireproof boards, and a double-sided wall is two sides painted or fireproof boards. Many exhibition halls stipulate that the booth on the side of the passageway should not be made into a single-side wall, so as not to affect the overall aesthetics.
　　2, brush paint material is best to use high density board as a substrate. Single package wall, generally use 5% board as a substrate, and then paste the fire board, fire board pack mainly and temperature or glue brush unevenly related.
　　3, wood structure board wall middle sandwich with wooden keel. According to the height of the wall size set the size of the keel thickness, general size of the keel are in the 30CM square, if the wall is low, and not force, can do 40CM-50CM square wood keel.
　　3, if you need to do the role of support, the board wall need to consider increasing the density of keel and cover plate thickness, can also use iron keel or steel pipe force. Then paste the fireproof board or paint.
　　4, fire prevention board seams require leveling, splicing to strive for the smallest, uniform, visual comfort, and no bulging phenomenon. It is better to use putty powder to putty the joints after the posting.
　　5, the paint requires the overall color consistency, no cracks, the surface is flat and even without miscellaneous colors.